联系电话:0755-27622763
E-mail:sales@szyn.net
当前位置: 首页 > 产品中心
自动切割压胶机Auto Cutting Laminator
自动切割压胶机Auto Cutting Laminator
自动切割压胶机Auto Cutting Laminator

简介(Descriptions)

1、自动贴膜、切割胶带,依客户需求,同时可设计对胶轮进行加热,增加板面与胶膜的贴合力。 

Automatic sticking film and cutting the tape. At the same time can be designed on wheel heating to increase the surface and the film sticking together according to customer demand.

2、生产效率高,可代替2-3人工

It  will replace  two or three labour, greatly improve the production efficiency

3、节约胶带,板边胶膜可控制在15MM内 

The tape on the edge of the board can be controlled within 15mm for saving the tape.

4、胶带固定方式简单,更换方便

the adhesive tape is simple and easy to replace.

5、可连接自动收板机,替代人工接收

can be connected to the automatic machine, instead of manual reception

规格参数(characteristics):

机台外形尺寸(Table size):2430mm*1245mm*1250mm

机台功率(interiorinput power):约(about) 1.2KW

机台电源(Machine power supply)220V 50HZ

空气压力要求(Air pressure requirement)5-8KG/CM²

输送速度(speed of transmission)0.5-10M/Min

最大板(Max PCB size)650mm*650mm

最小板(Min PCB size)250mm*250mm

板厚范围(PCB  Thinckness)0.6mm-4.0mm