联系电话:0755-27622763
E-mail:sales@szyn.net
当前位置: 首页 > 产品中心
自动包边机Auto Edge Taping Machine
自动包边机Auto Edge Taping Machine
自动包边机Auto Edge Taping Machine

自动包边机是深圳市永能机械有限公司自主研发,全球首创对PCB沉金板边进行自动包胶的设备,替代目前由人工包边的工艺。Auto Edge Taping Machine is self-developed The world's first equipment by Shen Zhen Yong Neng Machinery Co. Ltd.  Which used for PCB gold plate edge automatic encapsulation equipment to replace the current process by artificial wrapping.


规格参数(characteristics):

一、工艺流程Process flow:拍板/包边/出料

Tapping / wrapping / discharging 

二、 基本规格Basic specification:

1) 出入料方向Incoming and outgoing direction: 左进右出Left in and out of right

2) 外形尺寸External dimensions: 2445.5mm(L)×1402mm(W)×1146mm(H)

3) 最大过板尺寸Max PCB size:650mm×650mm

4)  最小过板尺寸Min PCB size:300mm×300mm

5) 板厚范围PCB thickness: 0.8mm~3.2mm

6) 使用胶带宽度Tape width: 12mm~35mm

7) 线速Line speed: 0.5~10m/min(可调tunable)

8) 电源 Machine power supply: 220V,50Hz

9)  功率 interiorinput power: 约about  1.5KW

10)空气压力要求(Air pressure requirement)5-8KG/CM²

11)输送速度(speed of transmission)0.5-10m/min

12)压辘轴Roller shaft:采用Ф45 的包胶轴输送轴,Ф40 Adops Ф45 rubber shaft and the wheel sheet is Ф 40.

 

     功能Function:再次通过进板轴轮将胶带对折贴于板的两边,再在Ф45 的包胶轴的作用下将胶带紧贴于板的两边。 fold the tape on both sides of the board again through the inlet axle wheel, and then attach the tape to the both sides of the board under the Ф45mm  action of the roller shaft .